• The World's Fastest Storage®: Sustained random bandwidth up to 5 GB/second.
• Next-Generation Series-7 Product Family: RamSan Series-7 is the 7th generation of the RamSan product family, originating from the first RamSan in 2000. All Series-7 RamSan products deliver cost-effective performance and reliability.
• 8 Gbit Fibre Channel: The RamSan-710 comes with new dual ported 8 Gbit Fibre Channel controllers.
• QDR InfiniBand: The RamSan-710 can be equipped with up to two dual ported QDR InfiniBand controllers.
• Fault Tolerant Flash (FTF): The Flash used in the RamSan-710 is enterprise grade SLC Flash. Each Flash card in the RamSan-710 includes on-board RAID protection to protect against chip failure. In addition, an advanced chip-level ECC provides multiple regions of bit correction per block.
• Active Spare: One FTF card can be designated as an active-spare that works hand-in-hand with the chip level RAID. If one of the cards experiences a failure that degrades its RAID protection, the system will immediately migrate the data on that card to the spare to return to a redundant state.
• Wear Leveling: The RamSan-710 includes wear-leveling technology that protects the underlying Flash media by spreading out writes and maximizing the write life of the system.
• Completely Non-Volatile: Flash memory is inherently non-volatile. Batteries are incorporated into the design anywhere RAM buffers are used with enough power to synchronize the buffers to Flash.
• Unparalleled Scalability: A single 1U chassis upgrades from 1 to 5 TB of Flash storage and two Fibre Channel ports or two InfiniBand ports. Multiple units can be added to meet any capacity or performance requirement.
• Batteries: The RamSan-710 incorporates N+1 batteries to allow for orderly shutdown.

Storage

• Capacity (Raw): 6,871 GB
• Capacity (Usable): 1 - 5 TB
• LUNs: 1,024 LUNs
• Storage Medium: SLC Flash

Performance

• Maximum Bandwidth: 5 GB/s
• Read IOPS: 400 K IOPS
• Read Latency: 175 microseconds
• Write IOPS: 400 K IOPS
• Write Latency: 35 microseconds

Interfaces

• Expansion Slots: 2 slots
• Fibre Channel Ports per Card: 2 ports/card
• Fibre Channel Speed per Port: 8 Gb/s
• InfiniBand Channel Width: 4 links
• InfiniBand Channels per Card: 2 channels/card
• InfiniBand Data Rate Standard: QDR
• InfiniBand Speed per Channel: 40 Gb/s

Management

• Supports Browser Management
• Supports SNMP Management
• Supports SSH Management
• Supports Telnet Management

Mechanical

• Form Factor: 1U

• A complete Flash storage system in a 3U rack
• Low overhead and low power
• High performance, 1 M IOPS, bandwidth, and capacity
• Standard management capabilities
• Active Spare for ultimate system reliability
• Two Flash ECC protection levels
• Separate LUNs assignable per internal RS-630 Flash card
• 512 byte block support, as well as the standard 4K block
• Fibre Channel interfaces
• InfiniBand interfaces
• Easy installation
• Low cost of ownership
• Scalable, expandable, flexible
• Low incremental upgrade cost
• Easy incremental addition of performance and capacity

Storage

• Capacity (Usable): 10 TB
• LUNs: 1,024 LUNs
• Storage Medium: SLC Flash

Performance

• Maximum Bandwidth: 10 GB/s
• Read IOPS: 1 M IOPS
• Read Latency: 250 microseconds
• Write IOPS: 1 M IOPS
• Write Latency: 80 microseconds

Interfaces

• Expansion Slots: 5 slots
• Fibre Channel Ports per Card: 2 ports/card
• Fibre Channel Speed per Port: 8 Gb/s
• InfiniBand Channel Width: 4 X
• InfiniBand Channels per Card: 2 channels/card
• InfiniBand Data Rate Standard: QDR
• InfiniBand Speed per Channel: 40 Gb/s

Management

• Supports Browser Management
• Supports SNMP Management
• Supports SSH Management
• Supports Telnet Management

Power

• Typical Power Consumption: 500 W

Mechanical

• Dimensions: 5.25" (3U) x 20"
• Form Factor: 3U
• Weight: 55 lbs

• 100.000 IOPS.
• 8 x 4Gbit/s FibreChannel Ports.
• 1TB - 2TB Flash RAID.
• 16GB bis 64GB DDR Cache.
• 2000MB/s Datendurchsatz.
• Integrierte USV (Unterbrechungsfreie Stromversorgung).
• Alle Komponenten Redundant und Hot Swappable.

Storage

• LUNs: 1,024 LUNs
• Storage Medium: RAM and SLC Flash

Performance

• Cache Size: 64 GB
• Read Latency (Cache Miss): 200 microseconds
• Write IOPS: 100 K IOPS
• Write Latency: 15 microseconds

Interfaces

• Expansion Slots: 4 slots
• Fibre Channel Ports per Card: 2 ports/card
• Fibre Channel Speed per Port: 4 Gb/s

Management

• Supports Browser Management
• Supports SNMP Management
• Supports SSH Management
• Supports Telnet Management

Power

• Typical Power Consumption: 300 W

Mechanical

• Form Factor: 4U
• Weight: 70 lbs

• The World's Fastest Storage^®: Sustained I/O rates up to 600,000 IOPS (at 4K block sizes) for reads or 250,000 IOPS for writes, and bandwidth up to 2 GB/second.
• Next-Generation Series-7 Product Family: RamSan Series-7 is the 7th generation of the RamSan product family, originating from the first RamSan in 2000. All Series-7 RamSan products deliver cost-effective performance and reliability.
• PCIe Interface: The RamSan-70 is an internal SSD that uses the fast, ubiquitous PCIe Generation 2 x8 connection. PCIe connectivity can be a powerful feature for high-end workstations, smaller reporting database systems, and other environments where an internal solution is an advantage.
• Small Form Factor: While many PCIe SSDs are built on full-length cards, the RamSan-70 uses a half-length card. This smaller form factor means that the RamSan-70 can be added to a wider range of servers.
• Fault Tolerant Flash (FTF): The Flash used in the RamSan-70 is enterprise grade SLC Flash. The RamSan-70 includes on-board RAID protection to protect against chip failure. An advanced chip-level ECC provides multiple regions of bit correction per block.
• Wear Leveling: The RamSan-70 includes wear-leveling technology that protects the underlying Flash media by spreading out writes and maximizing the write life of the system.
• Completely Non-Volatile: Flash memory is inherently non-volatile, and onboard capacitors keep RAM used for translation tables powered long enough for dumping data in the event of a power loss, so no time is wasted rebuilding tables when power goes down.
• Scalable PCIe: The RamSan-70s standard configuration includes 450 GB of Flash storage. However, a mezzanine card adds another 450 GB for a total of 900 GB of usable capcity in one standard half-length PCIe slot.

Storage

• Capacity (Raw): 640 - 1,280 GB
• Capacity (Usable): 450 - 900 GB
• Storage Medium: SLC Flash

Performance

• Maximum Bandwidth: 2 GB/s
• Read IOPS: 600.000 IOPS
• Read Latency: 70 microseconds
• Write IOPS: 250 K IOPS
• Write Latency: 30 microseconds

Interfaces

• PCI Express Lanes: 8 lanes
• PCI Express Version: 2.0

Mechanical

• Dimensions: half-length, full-height
• Form Factor: PCIe

The RamSan-10 and the RamSan-20 have the standard features you would expect from an enterprise storage design. Quite simply, they are designed for performance, reliability, and ease of use, with these key features:

• A storage system on a PCI card
• Low overhead, high performance
• High IOPS, bandwidth, and capacity
• Low power requirements
• ECC and RAID
• Embedded wear-leveling PowerPC
• Quick and easy to install

Storage

• Capacity (Usable): 225 - 450 GB
• Storage Medium: SLC Flash

Performance

• Maximum Bandwidth: 700 MB/s
• Read IOPS: 120 K IOPS
• Write IOPS: 120 K IOPS

Interfaces

• PCI Express Lanes: 4 lanes
• PCI Express Version: 1.0

Power

• Typical Power Consumption: 15 W

Mechanical

• Dimensions: full-length, full-height
• Form Factor: PCIe

• Over 600,000 random IOPS
• 4.5 GB/s random sustained external bandwidth
• IBM Chipkill technology
• RAIDed RAM boards
• Exclusive Active Backup^® software
• Patented IO² (Instant-On Input Output) software
• Full array of hardware redundancy to ensure availability

Storage

• Capacity (Usable): 512 GB
• LUNs: 1,024 LUNs
• Storage Medium: RAM

Performance

• Maximum Bandwidth: 4,500 MB/s
• Read IOPS: 600 K IOPS
• Read Latency: 15 microseconds
• Write IOPS: 600 K IOPS
• Write Latency: 15 microseconds

Interfaces

• Expansion Slots: 4 slots
• Fibre Channel Ports per Card: 2 ports/card
• Fibre Channel Speed per Port: 4 Gb/s

Power

• Typical Power Consumption: 650 W

Mechanical

• Dimensions: 7" (4U) x 24"
• Form Factor: 4U
• Weight: 90 lbs

• 400.000 IOPS.
• 2-8 x 4Gbit/s FibreChannel Ports oder 1-4 x 10Gbit/s InfiniBand.
• 32GB, 64GB, 96GB und 128GB Kapazität.
• Über 3000MB/s dauerhafter Datendurchsatz.
• Integrierte USV (Unterbrechungsfreie Stromversorgung).
• Datensicherung auf integrierte Festplatten.
• Exklusives Active Backup. Daten werden im laufenden Betrieb ohne Performanceeinbussen gesichert.
• Alle Komponenten Redundant und Hot Swappable.

Storage

• Capacity (Usable): 128 GB
• LUNs: 1,024 LUNs
• Storage Medium: RAM

Performance

• Maximum Bandwidth: 3,072 MB/s
• Read IOPS: 400 K IOPS
• Read Latency: 15 microseconds
• Write IOPS: 400 K IOPS
• Write Latency: 15 microseconds

Interfaces

• Expansion Slots: 4 slots
• Fibre Channel Ports per Card: 2 ports/card
• Fibre Channel Speed per Port: 4 Gb/s
• InfiniBand Channel Width: 4 X
• InfiniBand Channels per Card: 1 channels/card
• InfiniBand Data Rate Standard: SDR
• InfiniBand Speed per Channel: 8 Gb/s

Management

• Supports Browser Management
• Supports SNMP Management
• Supports SSH Management
• Supports Telnet Management

Power

• Typical Power Consumption: 350 W

Mechanical

• Dimensions: 5.25" (3U) X 25"
• Form Factor: 3U
• Weight: 80 lbs